Attack Shark

KEYBOARD POLLING RATE TESTER
Time Remaining
10.00s
Real-time Rate
0 Hz
After clicking "START TEST", alternate pressing two keys quickly (e.g., A and S).
The test will run for 10 seconds.
0
Max Rate
0
Min Rate (Peak)
0
Average Rate
-
Stability
* Browser Limitation: Web browsers have system-level limits on polling rate measurement. Values around 1000Hz usually indicate 1K+ support.
* Ensure you press keys quickly. Holding a key down does not trigger polling detection.

How to Use

1

Click START TEST to initialize the 10-second timer and polling detector.

2

Immediately begin pressing two keys (e.g., A and S) as rapidly and alternatingly as possible.

3

Maintain the rhythm until the timer hits zero. Do not hold keys down, as this stops polling events.

Understanding the Results

  • Max Rate: The highest report frequency detected. 1000Hz = 1ms delay.
  • Stability: Indicates how consistent the data transmission is. "Good" is ideal for gaming.
  • 125Hz vs 1000Hz: Standard office keyboards are locked at 125Hz. Gaming keyboards range from 1000Hz to 8000Hz.
  • Browser Limits: Some browsers may cap rates. If you see consistent ~1000Hz, your device is performing well.

Frequently Asked Questions

What is keyboard polling rate? +
Keyboard polling rate, measured in Hertz (Hz), indicates how frequently the keyboard reports keystroke data to the computer. A 1000Hz polling rate means the keyboard sends a signal every 1 millisecond (ms).
Is 1000Hz or 8000Hz better for gaming? +
For competitive gaming, higher is generally better. 1000Hz (1ms) is the standard for esports. 8000Hz (0.125ms) offers the lowest theoretical latency but requires a high-performance CPU and a high-refresh-rate monitor to notice the difference.
How do I accurately test my keyboard polling rate? +
Use an online polling rate tester like this one. Press and release multiple keys (like A and S) as rapidly as possible for at least 10 seconds. The 'Max Rate' displayed represents the peak frequency your keyboard achieved.
Does polling rate affect CPU usage? +
Yes. Standard 1000Hz keyboards have negligible impact. However, setting a keyboard to 4000Hz or 8000Hz generates significantly more interrupts, which can increase CPU usage and potentially lower FPS on older systems.
Why does the test result show less than 1000Hz? +
This can happen due to browser limitations, OS scheduling, or not pressing keys fast enough. Also, standard office keyboards are hardware-locked to 125Hz, so they will never exceed ~125Hz in tests.
What is the scan rate vs polling rate? +
Polling rate is how often data is sent to the PC via USB. Scan rate is how often the keyboard's internal matrix checks for key presses. A true low-latency keyboard needs both a high scan rate and a high polling rate.

Post del blog

Visualizza tutto
ATTACK SHARK Mega B2 gaming mouse on a black desk mat, with an orange-backlit keyboard glowing in the dark background

Cos'è un mouse con trigger rapido? Come il rilevamento magnetico TMR cambia i clic del mouse

Rapid Trigger reimposta un pulsante del mouse dopo un movimento verso l'alto minimo, mentre il rilevamento magnetico TMR consente un'attuazione regolabile senza contatti fissi.

ATTACK SHARK and Cloud9 announce League of Legends team partnership with Cloud9 Kia players

ATTACK SHARK annuncia una partnership strategica con il team di League of Legends Cloud9 Kia

Scopri perché questa partnership di Cloud9 con League of Legends è importante per gli appassionati di eSport, l’attrezzatura professionale e le periferiche da gaming accessibili.

ATTACK SHARK keyboard with purple Tokyo skyline for TOKYO KEYBOARD EXPO 2026

Incontra ATTACK SHARK al TOKYO TASTIERA EXPO 2026

ATTACK SHARK si dirige al Tokyo Ryutsu Center il 23 settembre 2026 per testare di persona le tastiere Hall Effect e i mouse da gaming presso lo stand B21-B23.